Publications

2015

P. Bruzzone; B. Stepanov; R. Wesche; K. Sedlák; D. Uglietti : EDIPO Test Faciliy - User specification. 2015.
R. Wesche : Physical Properties of High-Temperature Superconductors ; Wiley.
P. Bruzzone : Superconductivity and fusion energy-the inseparable companions; Superconductor Science & Technology. 2015. DOI : 10.1088/0953-2048/28/2/024001.
N. Bykovsky; D. Uglietti; R. Wesche; P. Bruzzone : Strain Management in HTS High Current Cables; IEEE Transactions on Applied Superconductivity. 2015. DOI : 10.1109/TASC.2014.2360041.
M. Lewandowska; R. Herzog; L. Malinowski : Transverse heat transfer coefficient in the dual channel ITER TF CICCs Part II. Analysis of transient temperature responses observed during a heat slug propagation experiment; Cryogenics. 2015. DOI : 10.1016/j.cryogenics.2014.11.001.
L. Muzzi; A. Anemona; A. Della Corte; A. Di Zenobio; S. Turtu et al. : Assessment Studies and Manufacturing Trials for the Conductors of DEMO TF Coils; IEEE Transactions on Applied Superconductivity. 2015. DOI : 10.1109/TASC.2014.2360561.
S. A. March; P. Bruzzone; K. Hamada; A. Foussat; A. Bonito-Oliva et al. : Applicability of Non-Destructive Examination to Iter TF Joints Nb3Sn; IEEE Transactions on Applied Superconductivity. 2015. DOI : 10.1109/TASC.2014.2361407.

2014

L. Bo; W. Yu; P. Bruzzone; B. Stepanov; Q. Jinggang et al. : The performance test and analysis of the third and fourth China PF conductor for ITER; Physics C: Superconductivity and its Applications. 2014.
R. Wesche; P. Bruzzone; C. F. Zignani; L. Affinito; S. Chiarelli et al. : Results of the test of a pair of 20 kA HTS currents leads. 2014. 11th European Conference on Applied Superconductivity (EUCAS), Genoa, ITALY, SEP 15-19, 2013. p. 032056. DOI : 10.1088/1742-6596/507/3/032056.
D. Uglietti; R. Wesche; P. Bruzzone : Construction and test of a non-insulated insert coil using coated conductor tape. 2014. 11th European Conference on Applied Superconductivity (EUCAS), Genoa, ITALY, SEP 15-19, 2013. DOI : 10.1088/1742-6596/507/3/032052.
S. March; R. Wesche; P. Bruzzone : Operational experience in the use of 18 kA HTS current leads for Edipo. 2014. 11th European Conference on Applied Superconductivity (EUCAS), Genoa, ITALY, SEP 15-19, 2013. p. 032008. DOI : 10.1088/1742-6596/507/3/032008.
B. Liu; Y. Wu; A. Devred; P. Bruzzone; B. Stepanov et al. : Conductor Performance of TFCN4 and TFCN5 Samples for ITER TF Coils; IEEE Transactions on Applied Superconductivity. 2014. DOI : 10.1109/TASC.2014.2376931.
D. Uglietti; R. Wesche; P. Bruzzone : Construction and test of a non-insulated insert coil using coated conductor tape; Journal of Physics: Conference Series. 2014. DOI : 10.1088/1742-6596/507/3/032052.
P. Bruzzone : Superconductivity and fusion energy—the inseparable companions; Superconductor Science and Technology. 2014. DOI : 10.1088/0953-2048/28/2/024001.
C. Senatore; M. Alessandrini; A. Lucarelli; R. Tediosi; D. Uglietti et al. : Progresses and challenges in the development of high-field solenoidal magnets based on RE123 coated conductors; Superconductor Science & Technology. 2014. DOI : 10.1088/0953-2048/27/10/103001.
P. Bruzzone; S. March; K. Sedlak; B. Stepanov; R. Wesche et al. : Collective Flux Jumps observed in the Operation of the EDIPO Magnet; IEEE Transactions on Applied Superconductivity. 2014. DOI : 10.1109/TASC.2014.2374333.
P. Bruzzone; B. Stepanov; K. Sedlák; N. Mitchell; A. Devred et al. : Summary of the Test Results of ITER Conductors in SULTAN. 2014. 25th Fusion Energy Conference (FEC 2014), Saint Petersburg, Russia, October 13-18, 2014.
P. Bruzzone : Pre-conceptual studies and R&D for DEMO superconducting magnets. 2014. 11th International Symposium on Fusion Nuclear Technology (ISFNT), Barcelona, SPAIN, SEP 15-20, 2013. p. 1775-1778. DOI : 10.1016/j.fusengdes.2013.12.031.
B. Liu; Y. Wu; P. Bruzzone; B. Stepanov; J. Qin et al. : The performance test and analysis of the third and fourth China PF conductor for ITER; Physica C-Superconductivity And Its Applications. 2014. DOI : 10.1016/j.physc.2014.02.001.
R. Wesche; P. Bruzzone; S. March; C. Mueller; M. Vogel et al. : Results of the Test of Industrially Manufactured HTS Current Leads With Novel Design Features; Ieee Transactions On Applied Superconductivity. 2014. DOI : 10.1109/Tasc.2013.2281121.
D. Uglietti; R. Wesche; P. Bruzzone : Design and Strand Tests of a Fusion Cable Composed of Coated Conductor Tapes; Ieee Transactions On Applied Superconductivity. 2014. DOI : 10.1109/Tasc.2013.2281783.
V. I. Tronza; S. A. Lelekhov; B. Stepanov; P. Bruzzone; D. S. Kaverin et al. : Test Results of RF ITER TF Conductors in the SULTAN Test Facility; Ieee Transactions On Applied Superconductivity. 2014. DOI : 10.1109/Tasc.2013.2289361.
B. Stepanov; P. Bruzzone; K. Sedlak; R. Wesche : Recent Tests of the ITER Conductors and Highlights in Nb3Sn Conductors Behavior; IEEE Transactions on Applied Superconductivity Asc. 2014. DOI : 10.1109/Tasc.2013.2288796.
Y. Nabara; T. Hemmi; H. Kajitani; H. Ozeki; T. Suwa et al. : Impact of Cable Twist Pitch on T-cs-Degradation and AC Loss in Nb3Sn Conductors for ITER Central Solenoids; Ieee Transactions On Applied Superconductivity. 2014. DOI : 10.1109/Tasc.2013.2284193.
Y. Nabara; T. Hemmi; H. Kajitani; H. Ozeki; T. Suwa et al. : Optimization of Heat Treatment of Japanese Nb3Sn Conductors for Toroidal Field Coils in ITER; IEEE Transactions On Applied Superconductivity. 2014. DOI : 10.1109/Tasc.2013.2286675.
M. Lewandowska; K. Sedlak : Thermal-Hydraulic Analysis of LTS Cables for the DEMO TF Coil; Ieee Transactions On Applied Superconductivity. 2014. DOI : 10.1109/Tasc.2013.2281625.
S. P. Kwon; S.-H. Park; W. Park; H. Choi; Y. J. Ma et al. : Manufacturing and Preliminary Performance Expectations of Nb3Sn Based Conductors Allocated for the First ITER TF Coil With CICC From Korea; Ieee Transactions On Applied Superconductivity. 2014. DOI : 10.1109/Tasc.2013.2287907.
G. Croari; P. Bruzzone : From Conception to Commissioning of EDIPO and SULTAN Quench Detection Systems; Ieee Transactions On Applied Superconductivity. 2014. DOI : 10.1109/Tasc.2013.2292325.
C. Calzolaio; P. Bruzzone : Analysis of the CICC Performance Through the Measurement of the Thermal Strain Distribution of the Nb-3 Sn Filaments in the Cable Cross Section; Ieee Transactions On Applied Superconductivity. 2014. DOI : 10.1109/Tasc.2013.2290617.
P. Bruzzone; S. March; G. Croari; M. Jenni; D. Uglietti et al. : Commissioning of the Main Coil of the EDIPO Test Facility; Ieee Transactions On Applied Superconductivity. 2014. DOI : 10.1109/Tasc.2013.2284721.
P. Bruzzone; K. Sedlak; B. Stepanov; L. Muzzi; S. Turtu et al. : Design of Large Size, Force Flow Superconductors for DEMO TF Coils; Ieee Transactions On Applied Superconductivity. 2014. DOI : 10.1109/Tasc.2013.2281.059.
N. H. Glowa; R. Wesche; P. Bruzzone : Quench studies of YBCO insulated and noninsulated pancake coils. 2014. p. 4701105. DOI : 10.1109/TASC.2013.2287636.

2013

S. A. March; R. Wesche; P. Bruzzone : Operational experience in the use of 18 kA HTS current leads. 2013. EUCAS 2013, Genova, Italy, September 15-19, 2013.
R. Wesche; P. Bruzzone; C. Fiamozzi Zagnini; L. Affinito; S. Chiarelli et al. : Results of the test of a pair of 20 kA HTS current leads. 2013. EUCAS 2013, Genova, Italy, September 15-19, 2013.
P. Bruzzone; K. Sedlak; B. Stepanov : High current superconductors for DEMO. 2013. 27th Symposium on Fusion Technology (SOFT). p. 1564-1568. DOI : 10.1016/j.fusengdes.2012.12.004.
R. Wesche; P. Bruzzone; S. March; C. Marinucci; B. Stepanov et al. : Prospects for the use of high-T-c superconductors in fusion magnets and options for their test in SULTAN. 2013. 27th Symposium on Fusion Technology (SOFT). p. 1495-1498. DOI : 10.1016/j.fusengdes.2013.01.068.
J. Qin; Y. Wu; M. Yu; B. Liu; H. Liu et al. : Manufacture of ITER feeder sample conductors. 2013. 27th Symposium on Fusion Technology (SOFT). p. 1461-1464. DOI : 10.1016/j.fusengdes.2013.01.008.
B. Liu; Y. Wu; J. Qin; F. Long; Y. Shi et al. : The performance test and analysis of ITER Main and Correction Busbar conductor; Fusion Engineering And Design. 2013. DOI : 10.1016/j.fusengdes.2013.04.029.
Y. Nabara; T. Hemmi; H. Kajitani; H. Ozeki; M. Iguchi et al. : Examination of Nb3Sn Conductors for ITER Central Solenoids; Ieee Transactions On Applied Superconductivity. 2013. DOI : 10.1109/Tasc.2013.2244159.
S. P. Kwon; S.-H. Park; B. Stepanov; P. Bruzzone; K. Kim : Preliminary Performance Test Results of First CICC From Korea Destined for an ITER TF Magnet; IEEE Transactions on Applied Superconductivity Asc. 2013. DOI : 10.1109/Tasc.2013.2244639.
C. Calzolaio / M. Q. Tran; P. Bruzzone (Dir.) : Irreversible Degradation in Nb3Sn Cable in Conduit Conductors. Lausanne, EPFL, 2013. DOI : 10.5075/epfl-thesis-5952.
D. Uglietti; R. Wesche; P. Bruzzone : Effect of transverse load on the critical current of a coated conductor Roebel cable; Superconductor Science & Technology. 2013. DOI : 10.1088/0953-2048/26/7/074002.
C. Calzolaio; P. Bruzzone; F. Roth : The relationship between the n-value and applied strain; Superconductor Science & Technology. 2013. DOI : 10.1088/0953-2048/26/7/075024.
G. Giunchi; L. Saglietti; A. F. Albisetti; E. Perini; C. Schiavone et al. : MgB2 Hollow Wires and Cables Embedded in a Mg Alloy Matrix; IEEE Transactions on Applied Superconductivity. 2013. DOI : 10.1109/Tasc.2012.2230671.
A. Devred; D. Bessette; P. Bruzzone; K. Hamada; T. Isono et al. : Status of Conductor Qualification for the ITER Central Solenoid; IEEE Transactions on Applied Superconductivity Asc. 2013. DOI : 10.1109/Tasc.2013.2245391.
D. Uglietti; R. Wesche; P. Bruzzone : Fabrication Trials of Round Strands Composed of Coated Conductor Tapes; IEEE Transactions on Applied Superconductivity Asc. 2013. DOI : 10.1109/Tasc.2013.2239351.
V. I. Tronza; V. I. Pantsyrny; B. Stepanov; P. Bruzzone; A. V. Paramonov et al. : Testing of RF 100 m TF Qualification Conductor in the SULTAN Test Facility; Ieee Transactions On Applied Superconductivity. 2013. DOI : 10.1109/Tasc.2013.2243798.
B. Stepanov; P. Bruzzone; K. Sedlak; G. Croari : SULTAN test facility: Summary of recent results; Fusion Engineering And Design. 2013. DOI : 10.1016/j.fusengdes.2013.02.133.
L. Zani; P. Barabaschi; P. Bruzzone; H. Cloez; E. Di Pietro et al. : Experimental and Analytical Approaches on JT-60SA TF Strand and TF Conductor Quality Control During Qualification and Production Manufacture Stages; IEEE Transactions on Applied Superconductivity Asc. 2013. DOI : 10.1109/Tasc.2012.2232951.
S. A. March; P. Bruzzone; B. Stepanov; D. Bessette; T. Boutboul et al. : Results of the TFEU6 Sample Tested in SULTAN; Ieee Transactions On Applied Superconductivity. 2013. DOI : 10.1109/Tasc.2012.2228893.
M. Lewandowska; R. Wesche : Parametric Study for the Cooling of HTS Current Leads Using a Liquid Nitrogen Bath; Ieee Transactions On Applied Superconductivity. 2013. DOI : 10.1109/Tasc.2012.2232698.
C. Calzolaio; P. Bruzzone; B. Stepanov : Monitoring of the Thermal Strain Distribution in CICCs During the Cyclic Loading Tests in SULTAN; IEEE Transactions On Applied Superconductivity. 2013. DOI : 10.1109/Tasc.2012.2235492.

2012

P. Bruzzone; B. Stepanov; R. Wesche; M. Calvi : Test Results of a 100 kA NbTi CICC. 2012. 22nd Int. Conference on Magnet Technology (MT), Marseille, France, September 12-16, 2011. p. 4805304-4805304. DOI : 10.1109/TASC.2011.2174597.
H. Liu; Y. Wu; P. Bruzzone; F. Long; Y. Shi et al. : Test Results of ITER Correction Coil Short Samples CCCN1 and CCCN2; Fusion Science and Technology. 2012.
A. Portone; J. Amend; W. Baker; P. Bruzzone; F. Cau et al. : The EDIPO Project: Status and Outlook. 2012. 22nd International Conference on Magnet Technology (MT), Marseille, September 12-16, 2011. DOI : 10.1109/Tasc.2011.2174593.
S.-H. Park; S. P. Kwon; K. Kim; B. Stepanov; P. Bruzzone : Conductor Performance Qualification of TFKO3 Sample for ITER TF Magnet. 2012. 22nd International Conference on Magnet Technology (MT)), Marseille, September 12-16, 2011. DOI : 10.1109/Tasc.2011.2178109.
Y. Nabara; Y. Nunoya; T. Isono; K. Hamada; Y. Takahashi et al. : Examination of Japanese Mass-Produced Nb3Sn Conductors for ITER Toroidal Field Coils. 2012. 22nd International Conference on Magnet Technology (MT), Marseille, September 12-16, 2011. DOI : 10.1109/Tasc.2011.2178990.
F. Long; Y. Wu; F. Liu; B. Liu; Y. Shi et al. : Manufacture and Acceptance Test of the Full Size ITER PF5 Conductor Sample. 2012. 22nd International Conference on Magnet Technology (MT), Marseille, September 12-16, 2011. DOI : 10.1109/Tasc.2011.2175432.
T. Hemmi; Y. Nunoya; Y. Nabara; M. Yoshikawa; K. Matsui et al. : Test Results and Investigation of Tcs Degradation in Japanese ITER CS Conductor Samples. 2012. 22nd International Conference on Magnet Technology (MT). DOI : 10.1109/Tasc.2011.2178370.
P. Bruzzone; B. Stepanov; R. Wesche; M. Calvi : Test Results of a 100 kA NbTi CICC. 2012. 22nd International Conference on Magnet Technology (MT). DOI : 10.1109/Tasc.2011.2174597.
P. Bruzzone; B. Stepanov; R. Wesche; C. Calzolaio; S. March et al. : Operation and Test Results From the SULTAN Test Facility. 2012. 22nd International Conference on Magnet Technology (MT). DOI : 10.1109/Tasc.2012.2191483.
M. Breschi; A. Devred; M. Casali; D. Bessette; M. C. Jewell et al. : Results of the TF conductor performance qualification samples for the ITER project; Superconductor Science & Technology. 2012. DOI : 10.1088/0953-2048/25/9/095004.
M. Lewandowska; M. Bagnasco : Conceptual design and analysis of a cryogenic system for a new test facility for high temperature superconductor current leads (HTS CLs); Przeglad Elektrotechniczny. 2012.
R. Wesche; D. Uglietti; P. Bruzzone; S. A. March; C. Marinucci et al. : Development of magnet technologies for HTS insert coils. 2012. EUCAS 2011, The Hague, The Netherlands, September 18-23, 2011. p. 1165-1168. DOI : 10.1016/j.phpro.2012.06.195.
R. Wesche; P. Bruzzone; S. A. March; M. Vogel; H. Ehmler et al. : Design and manufacture of 20 kA HTS current leads for a hybrid magnet system. 2012. EUCAS 2011, The Hague, The Netherlands, September 18-23, 2011. p. 927-930. DOI : 10.1016/j.phpro.2012.06.231.
R. Wesche; M. Boersch; P. Bruzzone; F. Holdener; E. Iten et al. : Development of HTS current leads for industrial fabrication. 2012. MT-22, International Conference on Magnet Technology, Marseille, France, September 11-16, 2011. DOI : 10.1109/Tasc.2011.2178013.
C. Calzolaio; P. Bruzzone; D. Uglietti : Measurement of Tc distribution in NbSn CICC. 2012. MEM-11,, Okinawa, Japan, November 2011. p. 054007. DOI : 10.1088/0953-2048/25/5/054007.
C. Calzolaio; P. Bruzzone; D. Uglietti; B. Stepanov; D. Bessette et al. : In situ Tc measurements of cable in conduit conductors via an inductive method. 2012. MT-22, International Conference on Magnet Technology, Marseille, France, September 11-16, 2011. DOI : 10.1109/Tasc.2011.2176459.
S. A. March; P. Bruzzone; B. Stepanov; D. Bessette; M. Jewell : Effect of Thermal Loading on Nb3Sn CICC Performance. 2012. MT-22, International Conference on Magnet Technology, Marseille, France, September 11-16, 2011. DOI : 10.1109/Tasc.2011.2178571.
B. Stepanov; P. Bruzzone; R. Wesche; S. Turtù; V. Corato et al. : Test Results of Three Poloidal Field Superconducting Samples in SULTAN. 2012. MT-22, International Conference on Magnet Technology, Marseille, France, September 11-16, 2011. DOI : 10.1109/Tasc.2011.2176704.
G. Croari; P. Bruzzone; C. Marinucci; S. A. March; R. Felder : EDIPO quench detection system: concept and development. 2012. MT-22, International Conference on Magnet Technology, Marseille, France, September 11-16, 2011. DOI : 10.1109/Tasc.2011.2178011.
D. Uglietti; R. Wesche; B. Stepanov; P. Bruzzone : Statistical analysis of the current-sharing temperature evolution in Nb3Sn cable-in-conduit-conductors for ITER. 2012. MT-22, International Conference on Magnet Technology, Marseille, France, September 11-16, 2011. p. 4802204. DOI : 10.1109/Tasc.2011.2175676.
D. Uglietti; C. Marinucci : Design of a quench protection system for a coated conductor insert coil. 2012. MT-22, International Conference on Magnet Technology, Marseille, France, September 11-16, 2011. p. 4702704. DOI : 10.1109/Tasc.2011.2176455.

2011

M. Lewandowska; R. Wesche : Parametric study for the cooling of high temperature superconductor (HTS) current leads. 2011. CHATS on Applied Superconductivity 2011, Geneva, Switzerland, October 12-14, 2011. p. 31-36. DOI : 10.1016/j.cryogenics.2012.06.014.
M. Lewandowska; R. Herzog : Transverse heat transfer coefficient in the dual channel ITER TF CICCs Part I: Analysis of steady state temperature profiles resulting from annular heating; Cryogenics. 2011. DOI : 10.1016/j.cryogenics.2011.09.003.
Y. Nunoya; Y. Nabara; M. Yoshikawa; K. Matsui; T. Hemmi et al. : Test Result of a Full-Size Nb3Sn Conductor Developed for the ITER TF Coils; Ieee Transactions On Applied Superconductivity. 2011. DOI : 10.1109/TASC.2010.2093488.
A. Portone; M. Bagnasco; B. Baker; P. Bruzzone; F. Cau et al. : Status Report of the EDIPO Project; Ieee Transactions On Applied Superconductivity. 2011.
M. Lewandowska; M. Bagnasco : Modified friction factor correlation for CICC's based on a porous media analogy; Cryogenics. 2011. DOI : 10.1016/j.cryogenics.2011.07.003.
C. Marinucci; L. Bottura; M. Calvi : Integrated analysis of quench propagation in a system of magnetically coupled superconducting coils. 2011. CHATS-AS XI, Geneva, Switzerland, October 12-14, 2011. p. 94-106. DOI : 10.1016/j.cryogenics.2012.10.003.
P. Bruzzone; B. Stepanov; R. Wesche; R. Herzog; C. Calzolaio et al. : Test of ITER conductors in SULTAN: an update. 2011. SOFT 2010, Porto, Portugal, September 27 - October 1, 2010. p. 1406-1409. DOI : 10.1016/j.fusengdes.2011.02.061.
R. Wesche; M. Bagnasco; P. Bruzzone; R. Felder; M. Guetg et al. : Test results of the 18 kA EDIPO HTS current leads. 2011. SOFT 2010, Porto, Portugal, September 27 - October 1, 2010. p. 1414-1417. DOI : 10.1016/j.fusengdes.2011.01.026.
P. Bruzzone : Review of design aspects for high current Nb3Sn conductors. 2011. Applied Superconductivity Conference, ASC-2010, Washington, DC, USA, August 1-6, 2010. p. 2036-2041. DOI : 10.1109/TASC.2010.2091095.
C. Marinucci; L. Bottura; M. Calvi; R. Wesche : Quench analysis of a high-current forced-flow HTS conductor model for fusion magnets. 2011. ASC, Washington, DC, USA, August 1-6, 2010. p. 2445-2448. DOI : 10.1109/TASC.2010.2090329.

2010

D. K. Oh; S.-H. Park; K. Kim; P. Bruzzone : Performance Test of TFK=2 qualification sample of ITER TF conductor; IEEE Transactions on Applied Superconductivity. 2010. DOI : 10.1109/TASC.2010.2044157.
C. Marinucci; L. Bottura; M. Calvi : A parametric AC loss model of the ITER coils for control optimization; Cryogenics. 2010. DOI : 10.1016/j.cryogenics.2009.06.003.
M. Bagnasco; L. Bottura; M. Lewandowska : Friction factor correlation for CICC's based on a porous media analogy; Cryogenics. 2010. DOI : 10.1016/i.cryogenics.2010.06.016.
P. Bruzzone; B. Stepanov; R. Wesche; M. Bagnasco; R. Herzog et al. : Operation and test results from the SULTAN test facility. 2010. Applied Superconductivity Conference, ASC-2010, Washington, DC, USA, August 1-6, 2010.
A. Portone; M. Bagnasco; B. Baker; P. Bruzzone; F. Cau et al. : Status report of the EDIPO project. 2010. Applied Superconductivity Conference, ASC-2010, Washington, DC, USA, August 1-6, 2010.
P. Bruzzone; B. Stepanov; R. Wesche; S. Turtu; V. Corato et al. : Test results of two ITER Poloidal Field conductor samples in SULTAN. 2010. Applied Superconductivity Conference, ASC-2010, Washington, DC, USA, August 1-6, 2010.
N. N. Martovetsky; D. R. Hatfield; J. R. Miller; P. Bruzzone; B. Stepanov et al. : Qualification of the U.S.-Made Conductors for ITER Toroidal Field (TF) Magnet System. 2010. p. 466-469.
L. Zani; P. Barabaschi; P. Bruzzone; D. Ciazynski; P. Decool et al. : Tests and Analyses of Two TF Conductor Prototypes for JT-60SA. 2010. 21st International Conference on Magnet Technology (MT-21), Anhui, PEOPLES R CHINA, Oct 18-23, 2009. p. 451-454. DOI : 10.1109/TASC.2010.2041199.
P. Bruzzone; R. Wesche; F. Cau : Results of thermal Strain and Conductor Elongation upon Heat Treatment for Nb3Sn Cable-in-Conduit Conductors. 2010. 21st International Conference on Magnet Technology (MT-21), Anhui, PEOPLES R CHINA, Oct 18-23, 2009. p. 470-473. DOI : 10.1109/TASC.2010.2042584.
A. della Corte; V. Corato; A. Di Zenobio; C. Fiamozzi Zignani; L. Muzzi et al. : Successful performances of the EU-AltTF sample, a large size Nb3Sn cable-in-conduit conductor with rectangular geometry. 2010. DOI : 10.1088/0953-2048/23/4/045028.
F. Cau; P. Bruzzone : Dependence of the ac loss on the aspect ratio in a cable in conduit conductor. 2010. DOI : 10.1088/0953-2048/23/4/045011.
Y. Nunoya; Y. Nabara; M. Yoshikawa; K. Matsui; T. Hemmi et al. : Test results for a full size Nb3Sn conductor developed for the ITER TF coils. 2010. Applied Superconductivity Conference, ASC-2010, Washington, DC, USA, August 1-6, 2010.
P. Bruzzone : Superconductors for fusion: achievements, open issues, roadmap to future. 2010. ISS2009 - 22nd Int'al Symposium on Superconductivity, Tsukuba, Japan, November 2-4, 2009. p. 1734-1739. DOI : 10.1016/j.physc.2010.05.196.
A. Shikov; V. Pantsyrny; A. Vorobieva; R. Vasilyev; N. Kozlenkova et al. : The result of Russian ITER TF conductor sample test in SULTAN. 2010. MT-21, International Conference on Magnet Technology, Hefei, China, October 17-23, 2009. p. 462-465. DOI : 10.1109/TASC.2010.2040950.
D. K. Oh; S.-H. Park; K. Kim; P. Bruzzone : Performance test of TFK02 qualification sample for ITER TF conductor. 2010. MT-21, International Conference on Magnet Technology, Hefei, China, October 17-23, 2009. p. 458-461. DOI : 10.1109/TASC.2010.2044157.
L. Muzzi; A. della Corte; S. Di Zenobio; S. Turtu; P. Barabaschi et al. : The JT-60SA toroidal field conductor reference sample: manufacturing and test results. 2010. MT-21, International Conference on Magnet Technology, Hefei, China, October 17-23, 2009. p. 442-445. DOI : 10.1109/TASC.2010.2041204.
B. Stepanov; P. Bruzzone; R. Wesche; N. Martovetsky; D. Hatfield et al. : Impact of Sample Preparation Procedure on the Test Results of four US ITER TF Conductors. 2010. MT-21, International Conference on Magnet Technology, Hefei, China, October 17-23, 2009. p. 508-511. DOI : 10.1109/TASC.2010.2041761.
M. Calvi; P. Bauer; F. Cau; C. Marinucci; P. Bruzzone : Design proposal for ITER feeder busbar system. 2010. MT-21, International Conference on Magnet Technology, Hefei, China, October 17-23, 2009. p. 407-410. DOI : 10.1109/TASC.2010.2041535.
P. Bruzzone; B. Stepanov; R. Wesche; M. Bagnasco; F. Cau et al. : Status Report of the SULTAN Test Facility. 2010. MT-21, International Conference on Magnet Technology, Hefei, China, October 17-23, 2009. p. 455-457. DOI : 10.1109/TASC.2010.2042583.
M. Bagnasco; D. Bessette; L. Bottura; C. Marinucci : Progress in the Integrated Simulation of Thermal-Hydraulic Operation of the ITER Magnet System. 2010. MT-21, International Conference on Magnet Technology, Hefei, China, October 17-23, 2009. p. 411-414. DOI : 10.1109/TASC.2010.2043836.
C. Marinucci; M. Calvi; L. Bottura; F. Cau; A. Portone : Analysis of the EDIPO temperature margin during current ramp-up. 2010. MT-21, International Conference on Magnet Technology, Hefei, China, October 17-23, 2009. p. 604-607. DOI : 10.1109/TASC.2010.2040380.
F. Simon; Y. Ilin; B. Su Lima; F. Cau; R. Herzog et al. : Reliability considerations of the ITER Poloidal Field Coils. 2010. 21st International Conference on Magnet Technology (MT-21), Anhui, PEOPLES R CHINA, Oct 18-23, 2009. p. 423-426. DOI : 10.1109/TASC.2010.2040262.
F. Cau; P. Bruzzone; M. Vogel : Design study of a superconducting magnet system for the European Synchrotron Radiation Facility. 2010. DOI : 10.1088/0953-2048/23/5/055006.
F. Cau; P. Bruzzone; M. Calvi : Interstrand resistance and contact resistance distribution on terminations of ITER short samples. 2010. 21st International Conference on Magnet Technology (MT-21), Anhui, PEOPLES R CHINA, Oct 18-23, 2009. p. 478-481. DOI : 10.1109/TASC.2010.2042935.

2009

N. N. Martovetsky; D. R. Hatfield; J. R. Miller; C. Gung; J. S. Schultz et al. : Test results of the first US ITER TF conductor in SULTAN; IEEE Transactions on Applied Superconductivity . 2009. DOI : 10.1109/TASC.2009.2018204.
R. Herzog; M. Lewandowska; M. Bagnasco; M. Calvi; C. Marinucci et al. : Helium Flow and Temperature Distribution in a Heated Dual-Channel CICC Sample for ITER; Ieee Transactions On Applied Superconductivity. 2009. DOI : 10.1109/TASC.2009.2018751.
P. Bruzzone; B. Stepanov; R. Wesche : Qualification tests for ITER TF conductors in SULTAN; Fusion Engineering and Design . 2009. DOI : 10.1016/j.fusengdes.2008.11.001.
R. Zanino; M. Bagnasco; D. Ciazynski; B. Lacroix; E. P. A. Van Lanen et al. : EU contribution to the test and analysis of the ITER poloidal field conductor insert and the central solenoid model coil; Superconductor Science and Technology. 2009. DOI : 10.1088/0953-2048/22/8/085006.
F. Cau; P. Bruzzone : Inter-strand resistance measurements in the termination of the ITER SULTAN samples. 2009. DOI : 10.1088/0953-2048/22/4/045012.
R. Wesche; M. Vogel; M. Calvi; F. Roth : Design and manufacture of 17 kA HTS current leads. 2009. EUCAS 2009, Dresden, September 13-17, 2009.
M. Bagnasco : Calorimetric Method Results for Current Sharing Temperature Measurements in ITER Conductor Samples in SULTAN. 2009. 25th Symposium on Fusion Technology, Rostock, GERMANY, Sep 15-19, 2008. p. 423-426. DOI : 10.1016/j.fusengdes.2009.01.060.
M. Lewandowska; M. Bagnasco : Pressure drop measurements in Cable-In-Conduit Conductors (CICC’s) for an extended range of Reynolds number. 2009. p. 152-155.
M. Bagnasco; M. Lewandovska : Pressure drop measurements in Cable-In-Conduit Conductors (CICC) with different layouts. 2009. p. 865-870.
R. Herzog; M. Lewandowska; M. Calvi; D. Bessette : Helium Flow and Temperatures in a heated sample of a final ITER TF cable- in-conduit conductor. 2009. EUCAS 2009, Dresden, September 13-17, 2009.
E. Todesco; R. Wesche; M. Bagnasco; P. Bruzzone; M. Calvi et al. : Results of conductor testing in Sultan: a review. 2009. WAMSDO, CERN, Geneva, Switzerland, May 19-23, 2008. p. 68-77.
A. Portone; W. Baker; A. Vostner; E. Salpietro; P. Testoni et al. : Status of the EDIPO project. 2009. ASC 2008 Applied Superconductivity Conference, Chicago, Illinois, USA, August 17-22, 2008. p. 1552-1556. DOI : 10.1109/TASC.2009.2018483.
K. Matsui; T. Isono; Y. Nunoya; T. Hemmi; Y. Okui et al. : Test results of Japanese SULTAN sample and conductor procurement in Japan for ITER TF Coils. 2009. ASC 2008 Applied Superconductivity Conference, Chicago, Illinois, USA, August 17-22, 2008. p. 1470-1473. DOI : 10.1109/TASC.2009.2017696.
N. Martovetsky; D. Hatfield; J. Miller; C. Gung; J. Schultz et al. : Test results of the first US ITER TF conductors in SULTAN. 2009. ASC 2008 Applied Superconductivity Conference, Chicago, Illinois, USA, August 17-22, 2008. p. 1478-1482.
C. Marinucci; L. Bottura; M. Calvi : A parametric AC loss model of the ITER coils for control optimization. 2009. CHATS-AS, Applied Superconductivity, Tsukuba, Japan, October 30-November 1, 2008. p. 187. DOI : 10.1016/j.cryogenics.2009.06.003.
R. Herzog; M. Calvi; C. Marinucci; P. Bruzzone : Helium flow-reversal in 3 m long, partially heated sections of dual-channel CICC for ITER. 2009. ASC 2008 Applied Superconductivity Conference, Chicago, Illinois, USA, August 17-22, 2008. p. 1488-1491.
R. Herzog; R. Wesche; P. Bruzzone : Ic measurements on Nb3Sn strands extracted from ITER CICC prototypes. 2009. ASC 2008 Applied Superconductivity Conference, Chicago, Illinois, USA, August 17-22, 2008. p. 1440-1443. DOI : 10.1109/TASC.2009.2019218.
I. Dixon; M. Bird; P. Bruzzone; B. Stepanov : Current sharing and AC loss measurements of cable-in-conduit conductor with Nb3Sn strands for the high field section of the series-connected hybrid outsert coil. 2009. ASC 2008 Applied Superconductivity Conference, Chicago, Illinois, USA, August 17-22, 2008. p. 2466-2469. DOI : 10.1109/TASC.2009.2018810.
F. Cau; P. Bruzzone; F. Staehli : AC Loss Measurements on Cable in Conduit Conductor with Random- Changing Magnetic Fields. 2009. 25th SOFT, Symposium on Fusion Technology, Rostock, Germany, September 15-19, 2008. p. 569-572. DOI : 10.1016/j.fusengdes.2008.11.040.
F. Cau; P. Bruzzone : AC loss measurements in CICC with different aspect ratio. 2009. ASC 2008 Applied Superconductivity Conference, Chicago, Illinois, USA, August 17-22, 2008. p. 2383-2386. DOI : 10.1109/TASC.2009.2018443.
F. Cau; M. Bagnasco; P. Bruzzone; M. Calvi; F. Roth : Interstrand resistance and current redistribution in a cable-in-conduit conductor (CICC) termination. 2009. ASC 2008 Applied Superconductivity Conference, Chicago, Illinois, USA, August 17-22, 2008. p. 1452-1456. DOI : 10.1109/TASC.2009.2019219.
P. Bruzzone; B. Stepanov; R. Wesche; R. Herzog; M. Calvi et al. : Qualification tests and facilities for ITER TF Superconductors. 2009. 22nd IAEA Fusion Energy Conf. (FEC) - 50th Anniversary of Controlled Nuclear Fusion Research, Geneva, Switzerland, October 10-18, 2008. DOI : 10.1088/0029-5515/49/6/065034.
P. Bruzzone; B. Stepanov; R. Wesche; A. della Corte; L. Affinito et al. : Test results of a Nb3Sn cable-in-conduit conductor with variable pitch sequence. 2009. ASC 2008 Applied Superconductivity Conference, Chicago, Illinois, USA, August 17-22, 2008. p. 1448-1451. DOI : 10.1109/TASC.2009.2018762.
P. Bruzzone; B. Stepanov; R. Wesche; Y. Ilyin; R. Herzog et al. : Methods, accuracy and reliability of ITER conductor tests in SULTAN. 2009. ASC 2008 Applied Superconductivity Conference, Chicago, Illinois, USA, August 17-22, 2008. p. 1508-1511. DOI : 10.1109/TASC.2009.2018508.

2008

M. Calvi; L. Bottura; C. Marinucci : Validation of SUPERMAGNET with PFI results. 2008. CHATS-AS, Applied Superconductivity, Tsukuba, Japan, October 30-November 1, 2008.
M. Bagnasco; M. Levandowska : Pressure drop measurements in Cable-In-Conduit Conductors (CICC) with different layouts. 2008. Int Cryogenic Engineering Conf. 22, and Int. Cryogenic Engineering Conf. 22, Seoul, Korea, July 21-25, 2008.
M. Bagnasco : Calorimetric method results for current sharing temperature Measurements in ITER Conductor Samples in SULTAN. 2008. 25th SOFT, Symposium on Fusion Technology, Rostock, Germany, September 15-19, 2008. DOI : 10.1016/j.fusengdes.2009.01.060.
P. P. Granieri; M. Calvi; P. Xydi; D. Bocian; L. Bottura et al. : Stability analysis of the LHC cables for transient heat depositions; IEEE Transactions on Applied Superconductivity. 2008. DOI : 10.1109/TASC.2008.922543.
B. Stepanov; P. Bruzzone; R. Wesche; M. Bagnasco; M. Vogel et al. : Re-test of the TFAS1 sample with solder filled extremities. 2008. 20th International Conference on Magnet Technology, Philadelphia, PA, USA, August 27-31, 2007. p. 1080-1083.
L. Bottura; C. Marinucci : A porous medium analogy for the helium flow in CICCs; INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER. 2008. DOI : 10.1016/j.ijheatmasstransfer.2007.07.051.
A. Vostner; P. Bauer; R. Wesche; U. B. Vetrella; B. Stepanov et al. : Development of the EFDA dipole high field conductor. 2008. 20th International Conference on Magnet Technology, Philadelphia, PA, USA, August 27-31, 2007. p. 544-547. DOI : 10.1109/TASC.2008.921329.
U. B. Vetrella; A. della Corte; G. De Marzi; A. Di Zenobio; L. Muzzi et al. : Manufacturing of the ITER TF full size prototype conductor. 2008. 20th International Conference on Magnet Technology, Philadelphia, PA, USA, August 27-31, 2007. p. 1105-1108.
Y. Takahashi; T. Isono; N. Koizumi; B. Stepanov; P. Bruzzone : Performance of Japanese Nb3Sn conductors for ITER toroidal field coils. 2008. 20th International Conference on Magnet Technology, Philadelphia, PA, USA, August 27-31, 2007. p. 471-474. DOI : 10.1109/TASC.2008.921866.
A. Shikov; V. Pantsyrny; A. Vorobieva; P. Bruzzone : Development of a new RF produced internal tin ITER TF conductor sample for testing in SULTAN facility. 2008. 20th International Conference on Magnet Technology, Philadelphia, PA, USA, August 27-31, 2007. p. 1076-1079.
A. Portone; W. Baker; E. Salpietro; P. Bruzzone; F. Cau : Design and procurement of the European dipole (EDIPO) superconducting magnet. 2008. 20th International Conference on Magnet Technology, Philadelphia, PA, USA, August 27-31, 2007. p. 499-504.
A. Portone; P. Bruzzone; M. Calvi; M. Bagnasco; F. Cau : Winding configurations studies for the EFDA dipole test facility EDIPO. 2008. 20th International Conference on Magnet Technology, Philadelphia, PA, USA, August 27-31, 2007. p. 196-199.
H. C. Kim; D. K. Oh; S. H. Park; K. Kim; P. Bruzzone : Development and Sultan test result of ITER conductor samples of Korea. 2008. 20th International Conference on Magnet Technology, Philadelphia, PA, USA, August 27-31, 2007. p. 1084-1087.
F. Cau; M. Bagnasco; P. Bruzzone; M. Calvi; F. Roth : Inter-strand resistance in the termination of ITER conductors; IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY. 2008. DOI : 10.1109/TASC.2008.921294.
M. Calvi; A. Bagnasco; P. Bruzzone; F. Cau; R. Herzog et al. : Preparatory work to host the EDIPO test facility at CRPP; IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY. 2008. DOI : 10.1109/TASC.2008.922280.
P. Bruzzone; M. Bagnasco; M. Calvi; F. Cau; D. Ciazynski et al. : Test results of two European ITER TF conductor samples in SULTAN; IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY. 2008. DOI : 10.1109/TASC.2008.922268.
P. Bruzzone; B. Stepanov; E. Salpietro; R. Wesche; A. Vostner et al. : Results of a new generation of ITER TF conductor samples in SULTAN; IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY. 2008. DOI : 10.1109/TASC.2008.922266.
F. Bellina; P. Bruzzone : The THELMA model of the joint resistance distribution tests with JORDI; EEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY. 2008. DOI : 10.1109/TASC.2008.920544.
M. Bagnasco; L. Bottura; P. Bruzzone; M. Lewandowska; C. Marinucci et al. : Pressure drop of cable-in-conduit conductors with different void fraction. 2008. Joint Cryogenic Engineering Conference/International Cryogenic Materials Conference, Chattanooga, TN, USA, July 16-20, 2007. p. 1317-1324. DOI : 10.1063/1.2908489.
R. Wesche; R. Herzog; P. Bruzzone : Comparison of the performances of the CS model coil and the good joint SULTAN sample; Supercond. Sci. Technol. . 2008. DOI : 10.1088/0953-2048/21/5/054001.
P. Testoni; F. Cau; A. Fanni; A. Portone; P. Sonato : Static and transient electromagnetic features of the EFDA dipole; IEEE Trans. Appl. Supercond.. 2008. DOI : 10.1109/TASC.2008.920676.
R. Herzog; R. Wesche; P. Bruzzone : Field and temperature dependence of critical currents in industrially manufactured high-Tc wires and tapes; J. Phys.: Conf. Ser.. 2008. DOI : 10.1088/1742-6596/97/1/012208.
D. Ciazynski; L. Zani; P. Bruzzone; B. Stepanov; R. Wesche et al. : Influence of cable layout on the performance of ITER-like Nb3Sn conductor; J. Phys.: Conf. Ser. . 2008. DOI : 10.1088/1742-6596/97/1/012027.
P. Bruzzone; M. Bagnasco; F. Cau; B. Stepanov; R. Wesche : Development of a react and wind conductor for the ITER toroidal field coils; IEEE Trans. Appl. Supercond.. 2008. DOI : 10.1109/TASC.2008.922260.
P. Bauer; P. Bruzzone; F. Cau; K. Weiss; A. Portone et al. : Solder-filling of a CIC cable for the EFDA dipole magnet; Advances in Cryogenic Engineering Materials, ICMC. 2008.

2007

C. Marinucci; L. Bottura; P. Bruzzone; B. Stepanov : Analysis of the transverse heat transfer coefficients in a dual channel ITER-type cable-in-conduit conductor. 2007. CHATS on Applied Superconductivity Workshop 2006, Berkeley, CA, Sep 05-07, 2006. p. 563-576. DOI : 10.1016/j.cryogenics.2007.08.008.
L. Bottura; P. Bruzzone; M. Calvi; R. Herzog; C. Marinucci : Simulation of the flow-reversal effect in dual-channel CICC for ITER. 2007. CHATS on Applied Superconductivity Workshop 2006, Berkeley, CA, Sep 05-07, 2006. p. 553-562. DOI : 10.1016/j.cryogenics.2007.08.005.
A. Shikov; V. Pantsyrny; A. Vorobieva; P. Bruzzone : Development and results of testing in SULTAN facility of a new RF produced internal tin ITER TF conductor sample. 2007. MT-20, International Conference on Magnet Technology, Philadelphia, Penn, USA, 27 August 2007.
R. Zanino; F. Bellina; M. Breschi; P. Bruzzone; N. Mitchell et al. : Modeling of the effects of current non-uniformity in SULTAN samples using the THELMA code. 2007. MT-20, International Conference on Magnet Technology, Philadelphia, Penn, USA, 27 August 2007.
A. Vostner; P. Bauer; R. Wesche; U. Besi Vetrella; B. Stepanov et al. : Qualification of the EFDA dipole high field conductor. 2007. MT-20, International Conference on Magnet Technology, Philadelphia, Penn, USA, 27 August 2007. p. 544.
P. Testoni; F. Cau; A. Fanni; A. Portone; P. Sonato : Static and transient electromagentic features of the EFDA dipole. 2007. MT-20, International Conference on Magnet Technology, Philadelphia, Penn, USA, 27 August 2007.
A. Portone; B. Baker; P. Bauer; E. Salpietro; A. Vostner et al. : Design and procurement of the EDIPO superconducting magnet. 2007. MT-20, International Conference on Magnet Technology, Philadelphia, Penn, USA, 27 August 2007.
A. Portone; P. Bruzzone; M. Calvi; M. Bagnasco; F. Cau : Winding configuration studies for the EFDA Dipole Test Facility EDIPO. 2007. MT-20, International Conference on Magnet Technology, Philadelphia, Penn, USA, 27 August 2007.
K. H.C.; O. D.G.; S. Park; K. Kim; P. Bruzzone : Development and SULTAN test result of ITER TF conductor samples of Korea. 2007. MT-20, International Conference on Magnet Technology, Philadelphia, Penn, USA, 27 August 2007.
P. P. Granieri; M. Calvi; P. Xydi; D. Bocian; L. Bottura et al. : Stability analysis of the LCH cables for transient heat depositions. 2007. MT-20, International Conference on Magnet Technology, Philadelphia, Penn, USA, 27 August 2007.
B. Stepanov; P. Bruzzone; R. Wesche; M. Bagnasco; M. Vogel et al. : Retest of the TFAS1 sample with solder filled extremities. 2007. MT-20, International Conference on Magnet Technology, Philadelphia, Penn, USA, 27 August 2007. p. 1080.
C. Marinucci; M. Calvi; L. Bottura; P. Bruzzone; R. Herzog : Quench analysis of the EDIPO high field superconducting dipole magnet. 2007. MT-20, International Conference on Magnet Technology, Philadelphia, Penn, USA, 27 August 2007.
M. Bagnasco; L. Bottura; P. Bruzzone; M. Lewandowska; C. Marinucci et al. : Pressure drop of cable-in-conduit conductors with different void fraction. 2007. CEC-ICMC, Cryogenic Engineering Conf and International Cryogenic Materials Conference, Chattanooga, Te, USA , 16 July 2007.
P. Bauer; P. Bruzzone; A. Portone; F. Roth; M. Vogel et al. : review of material properties, past experiences, procedures, issues and results for a possible solder filled cable as Plan B conductor for the EFDA dipole magnet (Draft Vs 1). 2007.
L. Bottura; P. Bruzzone; J. B. Lister; C. Marinucci; A. Portone : Computations of AC loss in the ITER magnets, during fast field transients; Ieee Transactions on Applied Superconductivity. 2007. DOI : 10.1109/TASC.2007.899837.
P. Bruzzone; M. Bagnasco; D. Ciazynski; A. della Corte; A. Di Zenobio et al. : Test results of two ITER TF conductor short samples using high current density Nb3Sn strands; Ieee Transactions on Applied Superconductivity. 2007. DOI : 10.1109/TASC.2007.898504.
P. Bruzzone; R. Herzog; B. Stepanov; M. Vogel; R. Wesche : Test results of a large size, forced flow Nb3Sn conductor, based on a design alternative to the cable-in-conduit; Ieee Transactions on Applied Superconductivity. 2007. DOI : 10.1109/TASC.2007.898502.
P. Bruzzone; B. Stepanov; R. Dettwiler; F. Staehli : Results of contact resistance distribution in NbTi and Nb3SnITER conductor termination; Ieee Transactions on Applied Superconductivity. 2007. DOI : 10.1109/TASC.2007.898505.
L. S. Richard; P. Bruzzone; N. Mitchell; P. L. Ribani; R. Zanino : Assessment of the effect of current non-uniformity on the ITER Nb3Sn good joint short sample DC performance; Ieee Transactions on Applied Superconductivity. 2007. DOI : 10.1109/TASC.2007.899039.
R. Wesche; R. Heller; P. Bruzzone; W. Fietz; R. Lietzov et al. : Design of high-temperature superconductor current leads for ITER; Fusion Eng. and Design. 2007. DOI : 10.1016/j.fusengdes.2007.01.004.
L. Zani; D. Ciazynski; A. Torre; P. Bruzzone; B. Stepanov et al. : Analysis of DC properties and current distribution in TFAS ITER conductor samples using high J(C) Nb3Sn advanced strands; Ieee Transactions on Applied Superconductivity. 2007. DOI : 10.1109/TASC.2007.899689.
R. Zanino; M. Astrov; M. Bagnasco; W. Baker; F. Bellina et al. : Predictive analysis of the ITER Poloidal Field Conductor Insert (PFCI) test program; Ieee Transactions on Applied Superconductivity. 2007. DOI : 10.1109/TASC.2007.899046.

2006

R. Wesche : High-Temperature Superconductors; Springer Handbook of Electronic and Photonic Materials; Springer US, 2006. p. 1193-1218.
P. Libeyre; D. Ciazynski; P. Decool; P. Bruzzone : New results and remaining issues in superconducting magnets for ITER and associated R&D in Europe. 2006. 21th IAEA Fusion Energy Conference, Chengdu, China, 16 October 2006.
K. Rummel; M. Czerwinski; P. Bruzzone; B. Stepanov; M. Vogel : Test results from the full size prototype test of W7-X joint. 2006. SOFT 2006, 24th Symposium on Fusion Technology, Warsaw, Poland, 11 September 2006.
P. Bruzzone; B. Stepanov; R. Wesche; M. Vogel : Design, manufacture and first results of a novel, large size, Nb3Sn force flow conductor. 2006. ICMC 2006. p. 123.
R. Zanino; L. Savoldi-Richard; F. Bellina; P. Bruzzone; N. Mitchell et al. : Assessment of the effect of current non-uniformity on the Nb3Sn good joint short sample DC performance. 2006. ASC 2006.
L. Zani; D. Ciazynski; B. Stepanov; R. Dettwiler; F. Roth : Analysis of critical electrical properties and current distribution of the first two full size conductor samples using Nb3Sn advanced strands developed for ITER. 2006. ASC 2006.
R. Wesche; F. Roth; P. Bruzzone : Comparison of the dc performance of various Nb3Sn strands used in cable-in-conduit for fusion. 2006. ICMC 2006. p. 145.
C. Marinucci; L. Bottura; P. Bruzzone; B. Stepanov : Analysis of the transverse heat transfer coefficients in a dual channel ITER-type cable-in-conduit conductor. 2006. CHATS-AS 2006.
P. Bruzzone; B. Stepanov; R. Dettwiler; F. Staehli : Test results of contact resistance distribution in NbTi and Nb3Sn ITER conductor termination. 2006. ASC 2006.
P. Bruzzone; R. Bagnasco; D. Ciazynski; R. Herzog; B. Stepanov et al. : The results of two ITER TF conductor short samples using high current density Nb3Sn strands. 2006. ASC 2006, Seattle, USA, August 2006. p. 1473.
L. Bottura; P. Bruzzone; R. Herzog; C. Marinucci : Simulation of the thermosyphon effect in dual channel CICC for ITER. 2006. CHATS-AS 2006.
R. Wesche; F. Roth; P. Bruzzone : "Final report on ""Tests of advanced Nb3Sn Strands"", EFDA Reference: ASTEST Contract 03-1121, Deliverable 4.3". 2006.
C. Marinucci; L. Bottura : AC losses computations for ITER magnets (EFDA ref. TW5-TPO-ACLOS/Contract No. 05-1307, Deliverable No. 2 and 3). 2006.
L. Bottura; P. Bruzzone; C. Marinucci; B. Stepanov : Analysis of the transverse heat transfer coefficients in a dual channel ITER-type cable-in-conduit conductor. 2006.
A. Anghel; P. Bruzzone; M. Vogel : Results of contact resistance distribution in ITER size conductor termination; Ieee Transactions on Applied Superconductivity. 2006. DOI : 10.1109/TASC.2006.873252.
L. Bottura; P. Bruzzone; C. Marinucci; B. Stepanov : Analysis of transverse heat transfer coefficient in CICC's with central cooling channel; Cryogenics. 2006. DOI : 10.1016/j.cryogenics.2006.02.004.
P. Bruzzone : 30 years of conductors for fusion: A summary and perspectives; Ieee Transactions on Applied Superconductivity. 2006. DOI : 10.1109/TASC.2006.873342.
P. Bruzzone; B. Stepanov; R. Wesche : Transverse load degradation in Nb3Sn cable-in-conduit conductors with different cable pattern; ADVANCES IN CRYOGENIC ENGINEERING. 2006.
P. Bruzzone; B. Stepanov; R. Wesche; A. Portone; E. Salpietro et al. : Test results of a small size CICC with advanced Nb3Sn strands; Ieee Transactions on Applied Superconductivity. 2006. DOI : 10.1109/TASC.2006.873320.
P. Bruzzone; B. Stepanov; R. Zanino; R. Savoldi : Results of buoyoncy-gravity effects in ITER cable-in-conduct conductor with dual channel; Adv. Cryo. Eng.. 2006.
P. Bruzzone; B. Stepanov; E. Zapretilina : A critical review of coupling loss results for cable-in-conduit conductors; Ieee Transactions on Applied Superconductivity. 2006. DOI : 10.1109/TASC.2006.871276.
R. Heller; W. H. Fietz; R. Lietzow; V. L. Tanna; A. Vostner et al. : 70 kA high temperature superconductor current lead operation at 80 K; Ieee Transactions on Applied Superconductivity. 2006. DOI : 10.1109/TASC.2006.871275.
A. Portone; E. Salpietro; L. Boitura; P. Bruzzone; W. Fietz et al. : Conceptual design of the 12.5 T superconducting EFDA dipole; Ieee Transactions on Applied Superconductivity. 2006. DOI : 10.1109/TASC.2005.864285.
A. Portone; E. Salpietro; L. Bottura; P. Bruzzone; A. Della Corte et al. : Design and optimization of the 12.5 T EFDA dipole magnet; Cryogenics. 2006. DOI : 10.1016/j.cryogenics.2006.01.011.
V. Tanna; W. Fietz; R. Heller; A. Vostner; R. Wesche et al. : Conceptual design of a high temperature superconductor current feeder system for ITER; J. of Physics: Conference Series. 2006. DOI : 10.1088/1742-6596/43/1/250.
R. Wesche; B. Stepanov; P. Bruzzone : Comparison of the DC performance of full- and sub-size NbTi cable-in-conduit conductors; Ieee Transactions on Applied Superconductivity. 2006. DOI : 10.1109/TASC.2006.871274.
R. Zanino; M. Bagnasco; W. Baker; F. Bellina; P. Bruzzone et al. : Implications of NbTi short-sample test results and analysis for the ITER poloidal field conductor insert (PFCI); Ieee Transactions on Applied Superconductivity. 2006. DOI : 10.1109/TASC.2006.873318.
R. Zanino; P. Bruzzone; R. Savoldi : A critical assessment of pressure drop design criteria for the ITER magnet conductors; Adv. Cryo. Eng.. 2006.

2005

W. H. Fietz; R. Heller; R. Lietzow; V. L. Tanna; G. Zahn et al. : High temperature superconductor current leads proposal for ITER. 2005. SOFE 2005 : 21st IEEE/NPSS Symposium on Fusion Engineering, Knoxville, TN USA, 26 September 2005.
R. Zanino; L. Savoldi-Richard; E. Salpietro; P. Bruzzone : Implications of NbTi short-sample test results and analysis for the ITER poloidal field conductor insert. 2005. 19th International Conference on Magnet Technology, Genova, Italy, 18 September 2005.
A. Portone; E. Salpietro; L. Bottura; P. Bruzzone : Conceptual design of the 12.5T superconducting EFDA dipole. 2005. 19th International Conference on Magnet Technology, Genova, Italy, 18 September 2005.
P. Bruzzone; B. Stepanov; E. Zapretilina : A critical review of coupling current losses for cable-in-conduct conductors. 2005. 19th International Conference on Magnet Technology, Genova, Italy, 18 September 2005.
P. Bruzzone : 30 Years of conductors for fusion. A summary and perspective. 2005. 19th International Conference on Magnet Technology, Genova, Italy, 18 September 2005.
A. Anghel; P. Bruzzone : Results of contact resistance distribution in ETER conductor termination. 2005. 19th International Conference on Magnet Technology, Genova, Italy, 18 September 2005.
R. Zanino; L. Savoldi-Richard; P. Bruzzone : A critical assessment of pressure drop design criteria for the ITER conductors. 2005. CEC/ICMC Cryogenic Engineering/ Int. Cryogenic Materials Conference, Keystone, CO, USA, 29 August 2005.
P. Bruzzone; B. Stepanov; R. Zanino : Results of thermo-siphon occurence in ITER cable-in-conduct conductor with dual channel. 2005. CEC/ICMC Cryogenic Engineering/ Int. Cryogenic Materials Conference, Keystone, CO, USA, 29 August 2005.
R. Wesche; R. Heller; W. Fietz; V. Tanna; G. Zahn : Report on the conceptual design of external HTS bus bars - EFDA reference TW4-TMSF-HTSCOM, Deliverable 2. 2005.
P. Bruzzone; M. Bagnasco; D. Bessette; D. Ciazynski; A. Formisano et al. : Test results of the ITER PF insert conductor short sample in SULTAN; Ieee Transactions on Applied Superconductivity. 2005. DOI : 10.1109/TASC.2005.849084.
P. Bruzzone; B. Stepanov; E. Zapretilina : Anomalies on V-I characteristic of NbTi cable-in-conduit conductors; Fusion Engineering and Design. 2005. DOI : 10.1016/j.fusengdes.2005.06.091.
D. Ciazynski; D. Bessette; P. Bruzzone; N. Martovetsky; B. Stepanov et al. : DC performances of ITER NbTi conductors: Models vs. measurements; Ieee Transactions on Applied Superconductivity. 2005. DOI : 10.1109/TASC.2005.849086.
W. H. Fietz; S. Fink; R. Heller; P. Komarek; V. L. Tanna et al. : High temperature superconductors for the ITER magnet system and beyond; Fusion Engineering and Design. 2005. DOI : 10.1016/j.fusengdes.2005.06.198.
A. Formisano; Y. Ilyin; L. Muzzi; R. Martone; P. Gislon et al. : DC and transient current distribution analysis from self-field measurements on ITER PFIS conductor; Fusion Engineering and Design. 2005. DOI : 10.1016/j.fusengdes.2005.06.075.
R. Heller; S. M. Darweschsad; G. Dittrich; W. H. Fietz; S. Fink et al. : Experimental results of a 70 kA high temperature superconductor current lead demonstrator for the ITER magnet system; Ieee Transactions on Applied Superconductivity. 2005. DOI : 10.1109/TASC.2005.849145.
F. H. Hurd; C. Sborchia; E. Salpietro; D. Duglue; C. Keefe et al. : Design and manufacture of a full size joint sample (FSJS) for the qualification of the poloidal field (PF) Insert coil; Ieee Transactions on Applied Superconductivity. 2005. DOI : 10.1109/TASC.2005.849095.
Y. A. Ilyin; A. Nijhuis; W. Abbas; P. Bruzzone; B. Stepanov et al. : Effect of cyclic loading and conductor layout on contact resistance of full-size ITER PFCI conductors; Ieee Transactions on Applied Superconductivity. 2005. DOI : 10.1109/TASC.2005.849088.
Y. A. Ilyin; A. Nijhuis; H. H. J. ten Kate; R. Bruzzone; B. Stepanov : Reconstruction of current unbalance in full-size ITER NbTiCICC by self-field measurements; Ieee Transactions on Applied Superconductivity. 2005. DOI : 10.1109/TASC.2005.849098.
C. Marinucci; P. Bruzzone; A. della Corte; L. S. Richard; R. Zanino : Pressure drop of the ITER PFCI cable-in-conduit conductor; Ieee Transactions on Applied Superconductivity. 2005. DOI : 10.1109/TASC.2005.849096.
N. N. Martovetsky; P. Bruzzone; B. Stepanov; R. Wesche; C. Y. Gung et al. : Effect of conduit material on CiCC performance under high cycling loads; Ieee Transactions on Applied Superconductivity. 2005. DOI : 10.1109/TASC.2005.849091.
B. Stepanov; P. Bruzzone; M. Vogel : A low cost joint for the ITER PF coils, design and test results; Fusion Engineering and Design. 2005. DOI : 10.1016/j.fusengdes.2005.06.092.
A. Ulbricht; J. L. Duchateau; W. H. Fietz; D. Ciazynski; H. Fillunger et al. : The ITER toroidal field model coil project; Fusion Engineering and Design. 2005. DOI : 10.1016/j.fusengdes.2005.07.002.
R. Wesche; A. Anghel; P. Bruzzone; P. Gislon; L. Muzzi : Analyses and implications of V-I characteristic of PF insert conductor sample; Fusion Engineering and Design. 2005. DOI : 10.1016/j.fusengdes.2005.06.158.
R. Wesche; A. Anghel; B. Stepanov; M. Vogel; P. Bruzzone : DC performance, AC loss and transient field stability of five medium size NbTi cable-in-conduit conductors with parametric variations; Cryogenics. 2005. DOI : 10.1016/j.cryogenics.2005.10.002.

2004

W. H. Fietz; R. Wesche; G. Pasztor; A. Vostner; E. Salpietro : Use of high temperature superconductors for future fusion magnet system. 2004. IAEA Fusion Energy Conference, Vilamoura, Portugal, 2004.
A. Anghel; P. Bruzzone : JORDI, a test facility for measurement of contact resistance distribution in full-size conductor terminations; Ieee Transactions on Applied Superconductivity. 2004. DOI : 10.1109/TASC.2004.830653.
P. Bruzzone : The index n of the voltage-current curve, in the characterization and specification of technical superconductors; Physica C-Superconductivity and Its Applications. 2004. DOI : 10.1016/j.physc.2003.09.005.
D. Ciazynski; L. Zani; M. Ciotti; P. Gislon; M. Spadoni et al. : Test results on the first 50 kA NbTi full size sample for the International Thermonuclear Experimental Reactor; Superconductor Science & Technology. 2004. DOI : 10.1088/0953-2048/17/5/013.
G. Giunchi; S. Raineri; R. Wesche; P. L. Bruzzone : The voltage-current relations for MgB2 obtained by reactive liquid infiltration; Physica C-Superconductivity and Its Applications. 2004. DOI : 10.1016/j.physc.2003.09.061.
R. Heller; D. Aized; A. Akhmetov; W. H. Fietz; F. Hurd et al. : Design and fabrication of a 70 kA current lead using Ag/Au stabilized Bi-2223 tapes as a demonstrator for the ITER TF-coil system; IEEE Transactions on Applied Superconductivity. 2004. DOI : 10.1109/TASC.2004.831075.
C. Marinucci; L. Bottura; P. Bruzzone; N. Mitchell; B. Stepanov et al. : Analysis and interpretation of Tcs tests of the ITER Toroidal Field Conductor Insert; Ieee Transactions on Applied Superconductivity. 2004. DOI : 10.1109/TASC.2004.830685.
G. Pasztor; P. Bruzzone : Ic(B,T,strain) characterization of a Nb3Sn internal tin strand with enhanced specifications for use in fusion conductors; Advances in Cryogenic Engineering. 2004.
G. Pasztor; P. Bruzzone; A. Anghel; B. Stepanov : An alternative CICC design aimed at understanding critical performance issues in Nb3Sn conductors for ITER; Ieee Transactions on Applied Superconductivity. 2004. DOI : 10.1109/TASC.2004.830686.
B. Stepanov; A. Anghel; P. Bruzzone; M. Vogel : Impact of impressed current unbalance on n-index; Ieee Transactions on Applied Superconductivity. 2004. DOI : 10.1109/TASC.2004.830667.
R. Wesche; A. Anghel; P. Bruzzone; B. Stepanov : Sudden take-off in large NbTi conductors: not a stability issue; ADVANCES IN CRYOGENIC ENGINEERING. 2004.
R. Wesche; A. Anghel; B. Stepanov; P. Bruzzone : DC performance of subsize NbTi cable-in-conduit conductors; IEEE Transactions on Applied Superconductivity. 2004. DOI : 10.1109/TASC.2004.830669.
R. Wesche; B. Stepanov; A. Anghel; S. Huber; G. Pasztor et al. : Self-field effects in NbTi subsize cable-in-conduit conductors; Physica C-Superconductivity and Its Applications. 2004. DOI : 10.1016/j.physc.2003.09.020.
L. Zani; D. Ciazynski; P. Gislon; B. Stepanov; S. Huber : Effect of current distribution on the voltage-temperature characteristics: study of the NbTiPF-FSJS sample for ITER; Physica C-Superconductivity and Its Applications. 2004. DOI : 10.1016/j.physc.2003.09.017.
R. Zanino; M. Bagnasco; P. Bruzzone; M. Ciotti; P. Gislon et al. : Analysis of thermal-hydraulic effects in the testing of the ITER poloidal field full size joint sample; Advances in Cryogenic Engineering. 2004.

2003

M. Pedrozzi; W. Gloor; A. Anghel : First operational results of the 3rd harmonic superconducting cavities in SLS and ELETTRA. 2003. 2003 Particle Accelerator Conference.
G. Pasztor; P. Bruzzone : Test results for Nb3Sn internal Sn strands for fusion conductors. 2003. Cryogenic Engineering Conference.
P. Bruzzone : The index n of the current-voltage curve, in the characterization and specificatin of technical superconductors. 2003.
L. Bottura; P. Bruzzone; C. Marinucci : Analysis of current redistribution in a CICC under transient heat pulses. 2003. Cryogenic Engineering Conference.
A. Anghel; P. Bruzzone : Jordi, test facility for measurement of contact resistance in full-size conductor terminations. 2003. MT-18 Conference.
C. Marinucci : Final report on the analysis and interpretation of Tcs tests of the ITER toroidal field conductor insert (Task GB8-M12, deliverable #7). 2003.
A. Anghel : A simple model for the prediction of quench point in cable-in-conduit conductors; Cryogenics. 2003. DOI : 10.1016/S0011-2275(03)00039-0.
P. Bruzzone; B. Stepanov; M. Vogel; T. Gloor; R. Wesche : Parametric studies of subsize NbTi cable-in-conduit superconductors for ITER-FEAT; IEEE Transactions on Applied Superconductivity. 2003. DOI : 10.1109/TASC.2003.812738.
P. Bruzzone; R. Wesche; B. Stepanov : The voltage/current characteristic (n index) of the cable-in-conduit conductors for fusion; IEEE Transactions on Applied Superconductivity. 2003. DOI : 10.1109/TASC.2003.812737.
P. Bruzzone; R. Wesche; B. Stepanov; M. Vogel : Recent results from R&D on superconductors at CRPP; Nuclear Fusion. 2003. DOI : 10.1088/0029-5515/43/8/303.
G. Giunchi; S. Ceresara; G. Ripamonti; A. Di Zenobio; S. Rossi et al. : High performance new MgB2 superconducting hollow wires; Superconductor Science & Technology. 2003. DOI : 10.1088/0953-2048/16/2/328.
Y. A. Ilyin; A. Nijhuis; H. H. J. ten Kate; B. Stepahov; P. Bruzzone : Self field measurements by hall sensors on the SeCRETS short sample CICC's subjected to cyclic load; Ieee Transactions on Applied Superconductivity. 2003. DOI : 10.1109/TASC.2003.812880.
S. L. Mao; C. A. Luongo; C. Marinucci : Quench simulation in superconducting cables using optimized DRP scheme; Ieee Transactions on Applied Superconductivity. 2003. DOI : 10.1109/TASC.2003.812869.
C. Marinucci; L. Bottura; P. Bruzzone : Analysis of the measurement of the current sharing temperature in the ITER TF model coil; Fusion Engineering and Design. 2003. DOI : 10.1016/S0920-3796(03)00241-2.
J. Pamela; E. R. Solano; J. M. Adams; G. Agarici; M. Agarici et al. : Overview of JET results; Nuclear Fusion. 2003. DOI : 10.1088/0029-5515/43/12/002.
P. D. Weng; P. Bruzzone; Z. M. Chen; B. Stepanov; J. L. Chen et al. : Test results and analyses of conductor short samples for HT-7U; Cryogenics. 2003. DOI : 10.1016/S0011-2275(03)00033-X.
R. Wesche; B. Stepanov; M. Vogel; T. Gloor; P. Bruzzone : DC behaviour of NbTi cable-in-conduit conductors for ITER-FEAT; Fusion Engineering and Design. 2003. DOI : 10.1016/S0920-3796(03)00229-1.

2002

W. P.D.; P. Bruzzone; C. Z.M.; B. Stepanov; C. J.L. et al. : Test results and preliminary analysis of HT-7U short samples. 2002. CHATS-2002.
P. Marchand; W. Gloor; M. Pedrozzi; A. Anghel; P. Bredy : Cryogenic system for the SLS third harmonic RF cavity. 2002. EPAC 2002.
Y. Ilyin; A. Nijhuis; H. TenKate; P. Bruzzone : Self field measurements fy Hall sensors on the SeCRETS short sample CICC_s subjected to cyclic load. 2002. ASC-2002.
S. Chel; P. Bosland; P. Bredy; A. Anghel : Super 3HC cryomodule general layout and first tests. 2002. EPAC 2002.
P. Bruzzone : Learning about hydraulics and stability through an AC loss test. 2002. CHATS-2002.
L. Bottura; C. Marinucci; P. Bruzzone : Analysis of current redistribution in a cable-in-conduit. 2002. CHATS-2002.
A. Anghel : A simple model for the prediction of quench point in cable-in-conduit conductors. 2002. CHATS-2002.
A. Anghel; P. Marchand; M. Pedrozzi; P. Bredy : The cryogenic system for the third harmonic superconductivity cavity at SLS and Electra. 2002. 19th Int. Cryogenic Engineering Conference and Industrial Exhibition (ICEC-19).
R. Wesche : Thermodynamic optimisation of 70kA bimary current lead. 2002.
J. Lister; P. Bruzzone; J. Favez; B. Schaerz; L. Bugnion et al. : Plasma Current, Position and Shape Control, Contract FU05-CT2001-00018 (EFDA/00-551). 2002.
L. Bottura; C. Marinucci; P. Bruzzone : Application of the code THEA to the CONDOPT experiment in SULTAN; Ieee Transactions on Applied Superconductivity. 2002. DOI : 10.1109/TASC.2002.1018693.
P. Bruzzone : Coupling currents loss in Nb3Sn cable-in-conduit conductors; Ieee Transactions on Applied Superconductivity. 2002. DOI : 10.1109/TASC.2002.1018458.
P. Bruzzone; A. Anghel; A. Fuchs; G. Pasztor; B. Stepanov et al. : Upgrade of operating range for SULTAN test facility; Ieee Transactions on Applied Superconductivity. 2002. DOI : 10.1109/TASC.2002.1018457.
P. Bruzzone; A. Formisano; R. Martone : Optimal magnetic probes location for current reconstruction in multistrands superconducting cables; Ieee Transactions on Magnetics. 2002. DOI : 10.1109/20.996271.
P. Bruzzone; A. Fuchs; B. Stepanov; G. Vecsey : Transient stability results for Nb3Sn cable-in-conduit conductors; Ieee Transactions on Applied Superconductivity. 2002. DOI : 10.1109/TASC.2002.1018455.
P. Bruzzone; A. M. Fuchs; B. Stepanov; G. Vecsey : Performance evolution of Nb3Sn cable-in-conduit conductors under cyclic load; Ieee Transactions on Applied Superconductivity. 2002. DOI : 10.1109/TASC.2002.1018456.
A. M. Fuchs; R. Wesche; A. Anghel; F. Roth; R. Heller et al. : Test results of a 10 kA current lead using Ag/Au cladded Bi-2212 tubes; Ieee Transactions on Applied Superconductivity. 2002. DOI : 10.1109/TASC.2002.1018636.
R. Heller; G. Friesinger; A. M. Fuchs; R. Wesche : Development of high temperature superconductor current leads for 70 kA; Ieee Transactions on Applied Superconductivity. 2002. DOI : 10.1109/TASC.2002.1018637.
Y. A. Ilyin; A. Nijhuis; H. H. J. ten Kate; P. Bruzzone : Self field measurements by Hall sensors on the SeCRETS long sample CICCs in SULTAN; Ieee Transactions on Applied Superconductivity. 2002. DOI : 10.1109/TASC.2002.1018727.
N. Koizumi; Y. Takahashi; Y. Nunoya; K. Matsui; T. Ando et al. : Critical current test results of 13 T-46 kA Nb3Al cable-in-conduit conductor; Cryogenics. 2002. DOI : 10.1016/S0011-2275(02)00128-5.
C. Marinucci; L. Bottura; P. Bruzzone : Transient stability analysis of the SeCRETS experiment in SULTAN; Ieee Transactions on Applied Superconductivity. 2002. DOI : 10.1109/TASC.2002.1018692.

2001

R. Wesche : High-Temperature Superconductors: A New Class of Materials for Fusion Magnets. 2001. 2001 Swiss Workshop on Materials with Novel Electronic Properties.
P. Bruzzone; A. Fuchs; B. Stepanov; G. Vecsey : Performance Results of Nb3Sn Cable-in-Conduit Conductors under cyclic Load. 2001. MT 17.
B. Schärz; P. Bruzzone; J.-Y. Favez; J. Lister; E. Zapretilina : The effect of the feedback controller on superconducting tokamak AC losses. 2001.
P. Bruzzone : Segregated Copper Ratio Experiment on Transient Stability (SeCRETS) - EU Task M29 / ITER Task N11TT03. 2001.
P. Bruzzone : Superconductivity: Hysteresis and Coupling Losses; Engineering Superconductivity; Wiley-Interscience, 2001. p. 138-152.
P. Bruzzone : Forced Flow Conductor Manufacturing; Engineering Superconductivity; Wiley-Interscience, 2001. p. 218-240.
A. Anghel : Self-field effects in large superconducting cables for ITER; Fusion Engineering and Design. 2001. DOI : 10.1016/S0920-3796(01)00466-5.
P. Bruzzone : Superconductors and joints, tests and trends for future development; Fusion Engineering and Design. 2001. DOI : 10.1016/S0920-3796(01)00244-7.
P. Bruzzone : Pressure drop and helium inlet in ITER CS1 conductor; Fusion Engineering and Design. 2001. DOI : 10.1016/S0920-3796(01)00435-5.
P. Bruzzone : Contact resistance distribution at the termination of cable-in-conduit conductors; Ieee Transactions on Applied Superconductivity. 2001. DOI : 10.1109/77.920219.
P. Bruzzone; A. M. Fuchs; B. Stepanov; G. Vecsey; E. Zapretilina : Test results of SeCRETS, a stability experiment about segregated copper in CICC; Ieee Transactions on Applied Superconductivity. 2001. DOI : 10.1109/77.920250.
J. L. Duchateau; H. Fillunger; S. Fink; R. Heller; P. Hertout et al. : Test program preparations of the ITER toroidal field model coil (TFMC); Fusion Engineering and Design. 2001. DOI : 10.1016/S0920-3796(01)00570-1.
A. M. Fuchs; B. Blau; P. Bruzzone; G. Vecsey; M. Vogel : Facility status and results on ITER full-size conductor tests in SULTAN; Ieee Transactions on Applied Superconductivity. 2001. DOI : 10.1109/77.920251.
R. Heller; G. Friesinger; A. M. Fuchs; P. Komarek; T. Mito et al. : Development program of a 60 kA high temperature superconductor current lead for the ITER toroidal field coils; Fusion Engineering and Design. 2001. DOI : 10.1016/S0920-3796(01)00354-4.
R. Heller; G. Friesinger; A. M. Fuchs; T. Mito; S. Satoh et al. : Development of a 20 kA high temperature superconductor current lead; Cryogenics. 2001. DOI : 10.1016/S0011-2275(01)00101-1.
N. Koizumi; K. Azuma; Y. Tsuchiya; K. Matsui; Y. Takahashi et al. : Evaluation of critical current performance of 13 T-46 kA steel jacketed Nb3Al conductor; Fusion Engineering and Design. 2001. DOI : 10.1016/S0920-3796(01)00465-3.

2000

R. Wesche; A. Anghel; A. Fuchs; G. Pasztor; G. Vecsey : High current applications of high-temperature superconductors, Invited paper. 2000. Société Suisse de Physique.
G. Vecsey : High current conductors for superconducting fusion magnets, Invited paper. 2000. Société Suisse de Physique.
H. Tsuji; K. Okuno; R. Thome; G. Vécsey : Progress of the ITER cental solenoid model coil program. 2000. 18th IAEA Fusion Energy Conference.
M. Svandrlik; C. Pasotti; P. Marchand; P. Bosland; A. Anghel : The SUPER-3HC project: an idle superconducting harmonic cavity for bunch length manipulation. 2000.
C. Marinucci; L. Bottura : Predictive quench initiation analysis of the ITER TF model coil. 2000. ICEC-18.
J. Lister; P. Bruzzone; A. Costley; T. Fukuda; Y. Gribov et al. : The technical issues associated with the control of steady-state tokamaks. 2000. 2nd IAEA Technical Committee Meeting on Steady-State Operation of Magnetic Fusion Devices - Plasma Control and Plasma Facing Components.
P. Bruzzone : Superconductors, Forces flow conductor manufacture; Wiley Encyclopedia of Electrical and Electronic Engineering, Suppl. 1; Wiley & Sons, 2000. p. 643-665.
P. Bruzzone : Hysteresis and coupling losses in superconductors; Wiley Encyclopedia of Electrical and Electronic Engineering, Suppl. 1; Wiley & Sons, 2000. p. 233-248.
A. Anghel; B. Jakob; G. Pasztor; R. Wesche; G. Vécsey et al. : Design, construction and operation of a neon refrigeration system for a HTS power transmission prototype cable; Advances in Cryogenic Engineering,. 2000.
A. Anghel; S. Pourrahimi; Y. Takahashi; G. Vecsey : Correlation between quench pressure and normal zone voltage observed in the QUELL experiment; Cryogenics. 2000. DOI : 10.1016/S0011-2275(01)00011-X.
L. Bottura; C. Marinucci; C. Rosso : Two-channel analysis of QUELL experimental results; Ieee Transactions on Applied Superconductivity. 2000. DOI : 10.1109/77.828426.
P. Bruzzone : Stability under transverse field pulse of the Nb3Sn ITER cable-in-conduit conductor; Ieee Transactions on Applied Superconductivity. 2000. DOI : 10.1109/77.828415.
P. Bruzzone : Manufacture and performance results of an improved joint for the ITER conductors; Adv. Cryog. Eng. 45. 2000.
P. Bruzzone; A. Fuchs; G. Vecsey; E. Zapretilina : Test results for the high field conductor of the ITER central solenoid model coil; Adv. Cryog. Eng.. 2000.
P. Bruzzone; A. Shikov; A. Vorobieva; V. Sytnikov; A. Nijhuis et al. : Characterization tests of the Nb3Sn cable-in-conduit conductors for Se.CRETS; Ieee Transactions on Applied Superconductivity. 2000. DOI : 10.1109/77.828421.
P. Bruzzone; G. Vecsey; A. Shikov; V. Pantsyrny; V. Sytnikov et al. : Se.CRETTS : A stability experiment on the role of segregated copper in Nb3Sn cable-in-conduit conductors; Ieee Transactions on Applied Superconductivity. 2000. DOI : 10.1109/77.828420.
D. Ciazynski; J. L. Duchateau; T. Schild; A. M. Fuchs : Test results and analysis of two European full-size conductor samples for ITER; Ieee Transactions on Applied Superconductivity. 2000. DOI : 10.1109/77.828414.
R. Heller; M. Tasca; P. Erismann; A. M. Fuchs; M. Vogel : Test results of a 10 kA current lead using Ag/Au stabilized Bi-2223 tapes; Ieee Transactions on Applied Superconductivity. 2000. DOI : 10.1109/77.828518.
J. B. Lister; P. L. Bruzzone; A. E. Costley; T. Fukuda; Y. Gribov et al. : Technical issues associated with the control of steady state tokamaks; Nuclear Fusion. 2000. DOI : 10.1088/0029-5515/40/6/314.
C. Marinucci; L. Bottura; C. Luongo; G. Vecsey : Proposal for a database for the validation of simulations in superconducting cables; Cryogenics. 2000. DOI : 10.1016/S0011-2275(01)00025-X.
C. Marinucci; G. Vecsey : Heat front propagation and quench initiation analysis of the ITER toroidal field model coil; Cryogenics. 2000. DOI : 10.1016/S0011-2275(01)00006-6.

1999

G. Pasztor; A. Anghel; A. M. Fuchs; B. Jakob; D. Trajkovic et al. : Manufacture and testing of a neon gas-cooled HTS prototype cable for power transmission. 1999. EUCAS'99. p. 1119-1122.
B. Blau : NbTi conductor with ITER CSMC geometry. 1999. Workshop on Short Sample Conductor Test Results.
J. Lister; P. Bruzzone; A. Costley; T. Fukuda; Y. Gribov et al. : Technical issues associated with the control of steady-state tokamaks. 1999.
B. Blau : Stability and quench of dual cooling channel cable-in-conduct superconductors. 1999.
P. Bruzzone : Strand resistance distribution in an improved full size joint for the ITER conductors; Ieee Transactions on Applied Superconductivity. 1999. DOI : 10.1109/77.783470.
D. C. George; V. Vrankovic; J. A. Zichy; R. K. Maix : Design study of a large-gap superconducting spectrometer dipole; Ieee Transactions on Applied Superconductivity. 1999. DOI : 10.1109/77.783337.
R. Heller; G. Friesinger; W. Goldacker; M. Quilitz; M. Tasca et al. : Status of the development program of a 60 kA HTSC current lead for the ITER toroidal field coils; Ieee Transactions on Applied Superconductivity. 1999. DOI : 10.1109/77.783346.
C. Marinucci; L. Bottura : The hydraulic solver Flower and its validation against the QUELL experiment in SULTAN; Ieee Transactions on Applied Superconductivity. 1999. DOI : 10.1109/77.783371.
C. Marinucci; L. Savoldi; R. Zanino : Stability analysis of the ITER TF and CS conductors using the code Gandalf; Ieee Transactions on Applied Superconductivity. 1999. DOI : 10.1109/77.783370.
A. Nijhuis; N. H. W. Noordman; H. H. J. ten Kate; N. Mitchell; P. Bruzzone : Electromagnetic and mechanical characterisation of ITER CS-MC conductors affected by transverse cyclic loading, part 2: Interstrand contact resistances; Ieee Transactions on Applied Superconductivity. 1999. DOI : 10.1109/77.783404.
A. Nijhuis; N. H. W. Noordman; H. H. J. ten Kate; N. Mitchell; P. Bruzzone : Electromagnetic and mechanical characterisation of ITER CS-MC conductors affected by transverse cyclic loading, part 1: Coupling current loss; Ieee Transactions on Applied Superconductivity. 1999. DOI : 10.1109/77.783482.
R. Wesche; A. Anghel; B. Jakob; G. Pasztor; R. Schindler et al. : Design of superconducting power cables; Cryogenics. 1999. DOI : 10.1016/S0011-2275(99)00098-3.
R. Zanino; C. Marinucci : Heat slug propagation in QUELL. Part I: Experimental setup and 1-fluid GANDALF analysis; Cryogenics. 1999. DOI : 10.1016/S0011-2275(99)00074-0.
R. Zanino; C. Marinucci : Heat slug propagation in QUELL. Part II: 2-fluid MITHRANDIR analysis; Cryogenics. 1999. DOI : 10.1016/S0011-2275(99)00075-2.
B. Blau / M. Q. Tran (Dir.) : Stability and quench of dual cooling channel cable-in-conduit superconductors. Lausanne, EPFL, 1999. DOI : 10.5075/epfl-thesis-2076.

1998

R. Wesche : High-Temperature Superconductors: Materials, Properties, and Applications ; Boston, MA: Kluwer Academic Publishers.
M. Zhelamskij; N. Gorbachuk; A. Anghel : Concept and sensor for extrinsic diagnostic of magnet systems from the safety point of view. 1998. 20th SOFT Conference.
R. Zanino; C. Marinucci; L. Savoldi : Two-fluid analysis of the thermal-hydraulic stability of ITER CS and TF superconductors. 1998. 17th Int. Cryo. Eng. Conference ICEC-17.
G. Pasztor; A. Anghel; B. Blau; A. Fuchs; B. Jakob et al. : Design, fabrication and testing of a 100 kA superconducting transformer for the SULTAN Test Facility. 1998. 15th International Conference on Magnet Technology.
P. Bruzzone; J. Lister; P. Paris; A. Pochelon : Fusion and plasma physics research in Switzerland. 1998.
D. Dew-Hughes; R. G. Scurlock; J. H. P. Watson; A. Anghel; G. Pasztor et al. : Neon refrigeration for high temperature superconducting power cable. 1998. 17th Int. Conference Cryogenic Engineering Conference, Bournemouth, UK. p. 337-340.
A. Anghel : QUELL experiment: analysis and interpretation of the quench propagation results; Cryogenics. 1998. DOI : 10.1016/S0011-2275(98)00016-2.
P. Bruzzone : AC losses and stability on large cable-in-conduit superconductors; Physica C. 1998. DOI : 10.1016/S0921-4534(98)00469-9.
S. DePalo; C. Marinucci; R. Zanino : Stability estimate for CICC with cooling channel using one- and two-fluid codes; Advances in Cryogenic Engineering. 1998.
C. Marinucci; L. Bottura; G. Vecsey; R. Zanino : The QUELL experiment as a validation tool for the numerical code Gandalf; Cryogenics. 1998. DOI : 10.1016/S0011-2275(98)00014-9.
A. Nijhuis; N. H. W. Noordman; H. H. J. ten Kate; N. Mitchell; P. Bruzzone : Magnetic and mechanical AC loss of the ITER CS1 model coil conductor under transverse cyclic loading; Physica C-Superconductivity and Its Applications. 1998. DOI : 10.1016/S0921-4534(98)00471-7.
R. Zanino; L. Bottura; C. Marinucci : Computer simulation of quench propagation in QUELL; Advances in cryogenic Engineering. 1998.
M. W. Zhelamskij; P. Bruzzone : A high resolution magnetization sensor for AC loss measurement on cable-in-conduit conductors; Physica C. 1998. DOI : 10.1016/S0921-4534(98)00473-0.

1997

R. Wesche : Development of long lengths Ag and AgNiMg/Bi-2212 superconductors; High-Temperature Superconductors: Synthesis, Processing, and Applications II; Warrendale, USA : The Minerals, Metals & Materials Society, 1997.
A. Anghel; Y. Takahashi; S. Smith; S. Pourrahimi; M. Zhelamskij et al. : The ITER-QUELL, a quench propagation experiment on long length CICC with central channel. 1997. 19th Symposium on Fusion Technology.
P. Bruzzone : Superconductors for fusion magnets: realizations, prototypes and running projects; Superconductor Science & Technology. 1997. DOI : 10.1088/0953-2048/10/12/012.
R. Heller; G. Friesinger; W. Goldacker; H. Kathol; B. Ullmann et al. : Development program of a 60 kA current lead using high temperature superconductors; Ieee Transactions on Applied Superconductivity. 1997. DOI : 10.1109/77.614598.
C. Marinucci; L. Bottura; S. Pourrahimi; M. Zhelamskij : Performance of the quench detection system for ITER; Ieee Transactions on Applied Superconductivity. 1997. DOI : 10.1109/77.614524.
S. Pourrahimi; S. P. Smith; J. H. Schultz; J. V. Minervini; S. Ezekiel et al. : Performance of the US quench detection systems in the QUELL experiments; Ieee Transactions on Applied Superconductivity. 1997. DOI : 10.1109/77.614530.
R. Zanino; L. Bottura; C. Marinucci : A comparison between 1- and 2-fluid simulations for QUELL; IEEE Trans. on Applied Superconductivity. 1997. DOI : 10.1109/77.614547.

1996

R. Wesche; A. M. Fuchs; G. Pasztor : Fabrication and properties of superconducting AgNiMg and Ag/Bi-2212 wires; High Temperature Superconductors: Synthesis, Processing, and Large-Scale Applications; Warrendale, USA : The Minerals, Metals & Materials Society, 1996.
R. Wesche; A. M. Fuchs; B. Jakob : Development of Bi-2212/Ag wires for magnet applications; Studies of High Temperature Superconductors; Commack, USA : Nova Science Publishers , 1996. p. 97-123.
B. Blau; B. Jakob; G. Pasztor; G. Vecsey; A. Cerri et al. : Evaluation of a NbTi cable-in-conduit prototype superconductor for the Wendelstein 7-X magnet system; Ieee Transactions on Magnetics. 1996. DOI : 10.1109/20.511364.
B. Jakob; G. Pasztor; A. Cerri; F. Vanini : The fabrication and properties of Nb3Sn superconductors by the internal tin process; Ieee Transactions on Magnetics. 1996. DOI : 10.1109/20.511478.
R. Wesche; A. M. Fuchs; B. Jakob; G. Pasztor : Axial and bending strain effects in Ag and AgNiMg/Bi-2212 wires; Cryogenics. 1996. DOI : 10.1016/0011-2275(95)00171-9.

1995

A. Anghel; C. Marinucci; G. Vecsey; Y. Takahashi; J. Schultz et al. : The ITER quench experiment on long length at the SULTAN facility. 1995. 18th Symposium on Fusion Technology.
A. Anghel : The quench experiment on long length cable-in-conduit conductor (QUELL) in SULTAN; Journal of Fusion Energy. 1995. DOI : 10.1007/BF02214040.
B. Blau; I. Rohleder; G. Vecsey; L. Bottura; P. Bruzzone et al. : Ac Behavior of Full-Size, Fusion Dedicated Cable-in-Conduit Conductors in Sultan-Iii under Applied Pulsed-Field; Ieee Transactions on Applied Superconductivity. 1995. DOI : 10.1109/77.402643.
B. Blau; I. Rohleder; G. Vecsey; L. Bottura; P. Bruzzone et al. : AC behaviour of full size, fusion dedicated cable-in-conduit conductors in SULTAN III under applied pulsed field; Ieee Transactions on Applied Superconductivity. 1995. DOI : 10.1109/77.402643.
C. Marinucci : Numerical simulations of the QUELL experiment in SULTAN; Journal of Fusion Energy. 1995. DOI : 10.1007/BF02214041.
C. Marinucci; L. Bottura; S. Pourrahimi : A first characterization of the quench detection system for ITER; Journal of Fusion Energy. 1995. DOI : 10.1007/BF02214036.
R. Wesche : Temperature-Dependence of Critical Currents in Superconducting Bi-2212/Ag Wires; Physica C. 1995. DOI : 10.1016/0921-4534(95)80024-7.

1994

D. Bessette; J. L. Duchateau; P. Decool; B. Turck; B. Blau : Qualification of a 40 Ka Nb3sn Superconducting Conductor for Net/Iter Coils; Ieee Transactions on Magnetics. 1994. DOI : 10.1109/20.305668.
A. M. Fuchs; A. Anghel; B. Jakob; G. Pasztor; G. Vecsey et al. : Development of binary superconducting current leads with a gas cooled normal part; Cryogenics. 1994. DOI : 10.1016/S0011-2275(05)80147-X.
C. Marinucci; G. Vécsey : Electromagnetic design of the SL superconducting bending magnet with linear gradient; IEEE Trans. on Magnetics. 1994. DOI : 10.1109/20.305644.
R. Wesche; A. M. Fuchs; B. Jakob; G. Pasztor : Diameter-Dependent Critical-Current Densities for Superconducting Bi-2212/Ag Wires; Cryogenics. 1994. DOI : 10.1016/0011-2275(94)90065-5.

1992

B. Blau; E. Aebli; B. Jakob; G. Pasztor; G. Vecsey et al. : Status-Report on the 12-Split Coil Test Facility Sultan; Ieee Transactions on Magnetics. 1992. DOI : 10.1109/20.119845.